The AS-4050i is a 60 sample autosampler (bioinert) for use with conventional HPLC with options for analytical and semi-preparative injection volumes.

The NRS-4500 Series is a purpose designed Confocal Raman Microscope with a wide functionality to make setup fast and easy. When changing lasers the selection and alignment of the laser, rejection filter and grating are fully automated. The laser spot is observed on all models including 1064nm ensuring that the sample being viewed in actually being measured. Sample identification, imaging analysis and identification can all be done in real time, speeding up the process of preparing the sample to seeing the results.

The J-1100 Circular Dichroism spectrophotometer is a compact, general-purpose space-saving design. This simple yet powerful instrument is perfect for users looking to obtain more routine CD measurements in both industry and academia.
The J-1100 uses simple optimized parameters so that a wide range of users with different levels of CD knowledge can get right down to work and successfully obtain high quality data. The wavelength range from 180 to 600 nm is suitable for obtaining secondary and tertiary structure measurements in the near- and far- UV. The intuitive Spectra Manager™ Suite of spectroscopy software provides the user with sample measurement, independent from the data processing and analysis. This allows users to obtain new measurements while simultaneously analyzing previously acquired data for increased productivity.

The IRT-1000 is a compact and easy to use in-compartment FTIR microscope that can be used with any FT/IR-4X or FT/IR-6X Series instrument. The microscope is exchanged in the same way as an ATR or transmission holder in the sample compartment, without an requirement for adjustment or optical alignment. The excellent throughput allows for highly sensitive measurements for samples as small as 20 microns. The IRT-1000 can be operated from the integrated touch panel and a PC using Spectra Manager™ Suite. Sample is observation is made with an integrated color CCD camera and a 5 inch TFT color LCD monitor and recorded using the imaging function in Spectra Manager™. JASCO’s unique ATOS (Aperture Through Optical System) provides simultaneous viewing of the sample image and sampling location specified by an aperture.

Integrating spheres measure either the diffuse transmittance or reflectance of a liquid, solid or powder samples. Typically UV-Visible or UV-Visible/NIR spectrophotometers are used to measure the transmittance of a homogeneous, transparent liquid or solid sample. However, when the light is diffusely scattered by samples such as suspended liquid, opaque solid or powders only a small portion of the light reaches the detector. An integrating sphere captures most of the light from the sample offering a more representative measurement of the sample.

The V-730 UV-visible spectrophotometer is designed to be simple to use with precise results, with 1 nm spectral bandwidth for high resolution and a linear dynamic range to over 3 AU across the entire spectrum. The wide wavelength range from 190 to 1100 nm offers versatile measurement for many different applications. Spectra Manager™ CFR (for 21 CFR part 11 compliance) is available as an option.

The Peltier cell holder offers fast and accurate temperature control for measuring the specific optical rotation of the unknow sample.

An ATR accessory is one of the most practical choices for sample measurement. In most cases there is very little requirement for sample preparation. The ATR Pro One and ATR Pro One View are the‘signature’ single reflection monolithic diamond models with wide spectral range and high optical throughput.

Phosphorescence materials are frequently used to increase the quantum efficiency of materials since the radiative decay from both the triplet and singlet states contributes to the light emission. Since typically the lifetime of phosphorescence is long, thermal deactivation occurs by oxygen quenching, solvent movement, and intermolecular collision and the phosphorescence cannot be observed at room temperature. The sample is therefore cooled to liquid nitrogen temperature to slow down the relaxation process.

The FP-8250 is a user-friendly, general-purpose instrument. The simplified, yet sensitive design includes everything that is required for routine fluorescence measurements in a quality-control or teaching lab. The standard Auto-Sensitivity Control System (Auto-SCS) and Auto-Gain features enable measurement over a wide range of concentrations using a single calibration method. The Spectra Manager™ Suite of spectroscopy software offers full system control, with easy-to-use tools for data processing and analysis.

The RO-2068 reaction oven is used for high temperature post-column sample processing with capacity for columns and reaction coils.

The RI-4035 refractive index detectors include an optical system mounted in a precise temperature-regulated housing to eliminate the influence of changes in ambient temperature. Both detectors are fully stable just one hour after powering on.