EYELA｜Spray Dryer
Feature :
- Short drying time prevents influence on sample from high temperature.
- Sample solvents can be collected in the form of uniform dried power. Pre-processing filtration, condensation, or post processing griding are not required.
- Digital display of inlet and outlet drying air temperature, spray air pressure together with recorder outlet enable experiment data setting, confirmation ad recording.
- Automatic cleaning by timer for air spraying nozzle. Powders sticked inside nozzle can be removed by pushing needle. Crystals sticked to top end of nozzle can be removed by cleaning port of the evaporation tube.
- Magnetic stirrer, suction filter, and outlet air filter are equipped as standard.
|
Model |
SD-1010 |
|
Type |
Two way nozzle spray type |
|
Dehumidification capacity |
1500 mL/h |
|
Temp. control range |
40 ~ 200℃ (at inlet) |
|
Temp. control accuracy |
± 1℃ |
|
Heated air volume |
0.2 ~ 0.75 m3/min |
|
Spray air pressure |
20 ~ 250 kPa (0.2 ~ 2.5 kg/cm2) |
|
Circulation pump flow volume |
150 ~ 1700 mL |
|
Stirrer rotation speed |
100 ~ 1000rpm |
|
Stirrer rotation capacity |
50mL ~ 2L |
|
Safety features |
Evaporation tube cover, self-diagnosis function (Overheat, excessive air flow, Heater break), Leak/over current breaker |
|
Heater |
3kW |
|
Stirrer |
DC brushless motor, 6W |
|
Dimensions |
W700 x D620 x H1500 mm |
|
Weight |
110kg |
