Features

• All kinds of fuel gases can be automatically analyzed with high accuracy
  e.g.：Natural gas or city gas
• Measures gas composition (vol%)
• Analysis available of 18 components ranging from H2 to C6 up; H2, O2, N2, CH4, CO, CO2, C2H4, C2H6, C3H4, Analysis of H2 to C5 available in 15 min only
• Analysis time shortened with 3 pieces of TCD detectors and original column system
  
  
  
  
  

• Flow path 2 types of carrier gas, 4 flow path system
• Flow path control Each of the 4 flow paths is equipped with a constant pressure valve and pressure gauge(0 to 400 kPa)
• Equipped with a constant pressure valve and pressure gauge (0-400 kPa) in the pre-cut flow path

• Temperature 50 ℃ setting
• Temperature control PID control
• Heater capacity : 600 W
• Temperature settings : Digital settings
• Temperature display : Digital display
• Safety device:  Equipped with overheating prevention mechanism as standard
• If the temperature becomes 10 °C or higher than the set temperature or 100 °C or more, the heater circuit will be shut off and a lamp will be displayed.

• Detector tank Detector : Thermal conductivity detector (TCD)
• Temperature : 100 ℃
• Temperature settings : Digital settings
• Temperature display :Digital display
• Safety device : If the temperature becomes 30 ℃ or more higher than the set temperature or 150 ℃ or more, the heater circuit will be cut off and a lamp will be displayed
• Sample introduction : Automatic introduction using four pneumatically driven automatic sample introduction cock