JM1001CN
The measurement sample is burned and the two elements, carbon, and nitrogen, contained in the gas components obtained are measured simultaneously.
Measurement samples can be analyzed from solids to liquids, supporting a wide range of sample analyses.
The carrier gas can be switched, and argon gas can be used in addition to helium gas.
Feature
- Carrier gas switching function is included as standard, so switching is possible without the support of a technician
- Since the sample boat is collected after each analysis, no combustion residue remains in the combustion tube. Furthermore, since the ash content can be recovered, the ash content can be used for other analyses
- Control software constantly monitors temperature, gas pressure, and detector signals, allowing safe unattended operation
- TOC analysis is also possible by treating the measurement sample with hydrochloric acid in advance
|
Model |
JM1001CN |
|
Measuring element |
carbon, nitrogen |
|
Sample weight |
Organic matter: max. 500 mg Inorganics: max. 2000 mg |
|
Measuring range (helium) |
Carbon: 0.02~125 mg Nitrogen: 0.02-12 mg |
|
Measuring range (argon) |
Carbon: 0.1-125 mg Nitrogen: 0.1-12 mg |
|
Stable turnaround time |
The analysis can typically be completed within approximately 90 minutes from the initiation of the instrument |
|
Detector |
Thermal Conductivity Detector |
|
Malfunction alarm function |
Notification by alarm, display the contents on the screen, automatic stop |
|
Power supply |
Single-phase AC100V, 4 kVA, 50/60 Hz |
|
Dimensions/weight |
Equipment：760(W)×585(D)×485(H) mm 90 kg
|
|
Gas |
Carrier Gas（Helium, Argon）99.99 %
|
