The FP-8650 spectrofluorometer uses a uniquely red-sensitive PMT that extends the measurement range from the UV-Visible to the near infrared. Providing excitation wavelengths from 200 to 850 nm and emission detection up to 980nm (1010 nm option). Samples such as carbon nanotubes, porphyrins and other NIR markers can easily be measured. It is especially well-suited for monitoring NIR-labeled biologicals far away from background auto-fluorescence. The compact instrument design incorporates high-speed scanning and automatic cut-off filters to exclude higher-order diffraction for fast, accurate acquisition of single spectra and EEMs (Excitation-Emission-Matrices).

The V-770 UV-Visible/NIR spectrophotometer features a unique single monochromator design for maximum light throughput with excellent absorbance linearity. A PMT detector is used for the UV to visible region and a Peltier-cooled PbS detector for the NIR region to 2700 nm (option 3200 nm).

For GPC and larger preparative columns, select either of the two high-capacity CO-4060 or CO-4065 HPLC column ovens. The CO-4060 can accommodate columns with lengths up to 300mm or larger ID preparative columns. The CO-4065 can accommodate up to 10 columns with lengths up to 300mm and a pair of column selection valves is included as standard.

Measure the transmittance of solid, transparent samples such as films, plate glass, and filters. The FLH-740 includes leaf-springs for holding the sample and the FLH-741 includes a sliding clamp and mask for small area measurement. RSH-744 can be rotated 360° with respect to the optical axis and the inclination/tilt of the sample versus the source beam can be varied within a range of ±50°. VTA-752 is used to measure transmittance of a film-like sample when the incident angle of the light beam is varied. This incident angle can be set in 1º increments with a rotation range of ±90°.

Each base unit has two expansion bays that allow an isocratic pump to be transformed into a binary or quaternary gradient solvent delivery system with internal degasser, mixer and optional solvent selection for method development.

NRS-7000 is desiged as highest performance Raman spectrometers based on combined technologies with excellent optical design, mechanical design, and usability software.

The IRT-7200 Linear Array FTIR Imaging microscope includes two detectors as standard, a 16-channel linear array detector and a single-point mid-band MCT detector. The combination of the standard automatic sample stage and IQ Mapping allows mapping analyses of a larger sample area, multi-area ATR mapping, and IR imaging of a specified area with extremely high spatial resolution and excellent sensitivity in a short time.

Materials that exhibit circularly polarized luminescence are being actively investigated in applications such as liquid crystal display backlights, 3D displays, holographic displays, light sources for controlling plant growth, and security systems for optical communications and printing. It is therefore important to identify molecules that emit one-handed circularly polarized light with high quantum yield. CPL spectra contain important information such as the stable structure of excited molecules, and the behavior of these molecules in chemical reactions that involve an intermediate excited state. The CPL-300 offers high sensitivity for detection of these weak signals over a wide spectral range. The instrument’s unique double-prism excitation and emission monochromators offer very low stray-light and no spurious linear polarization effects caused by instruments that use diffraction gratings.

Diffuse reflectance is a useful technique for samples with a roughened surface which are not amenable to transmission or ATR measurement.

Used with a temperature controlled circulating water bath (not supplied) to maintain a constant sample and reference cell temperature.

The V-780 UV-visible/NIR spectrophotometer features a single monochromator with automatically exchanged gratings. A PMT detector is used for the UV-Visible region and a high sensitivity InGaAs detector in the NIR region.

For GPC and larger preparative columns, select either of the two high-capacity CO-4060 or CO-4065 HPLC column ovens. The CO-4060 can accommodate columns with lengths up to 300mm or larger ID preparative columns. The CO-4065 can accommodate up to 10 columns with lengths up to 300mm and a pair of column selection valves is included as standard.