Square drying chamber for automatically controlling pre-freezing, first-stage drying and second-stage drying.

Selectable configuration and upgrade possibility.

Vacuum oven equipped with microprocessor for programming and self-diagnosis functions.

Cold trap featuring variety of new functions and digital display of trap temperature.

An ATR accessory is one of the most practical choices for sample measurement. In most cases there is very little requirement for sample preparation. The ATR Pro One and ATR Pro One View are the‘signature’ single reflection monolithic diamond models with wide spectral range and high optical throughput.

Phosphorescence materials are frequently used to increase the quantum efficiency of materials since the radiative decay from both the triplet and singlet states contributes to the light emission. Since typically the lifetime of phosphorescence is long, thermal deactivation occurs by oxygen quenching, solvent movement, and intermolecular collision and the phosphorescence cannot be observed at room temperature. The sample is therefore cooled to liquid nitrogen temperature to slow down the relaxation process.

The FP-8250 is a user-friendly, general-purpose instrument. The simplified, yet sensitive design includes everything that is required for routine fluorescence measurements in a quality-control or teaching lab. The standard Auto-Sensitivity Control System (Auto-SCS) and Auto-Gain features enable measurement over a wide range of concentrations using a single calibration method. The Spectra Manager™ Suite of spectroscopy software offers full system control, with easy-to-use tools for data processing and analysis.

The RO-2068 reaction oven is used for high temperature post-column sample processing with capacity for columns and reaction coils.

The RI-4035 refractive index detectors include an optical system mounted in a precise temperature-regulated housing to eliminate the influence of changes in ambient temperature. Both detectors are fully stable just one hour after powering on.

The FP-4020 and FP-4025 fluorescence detectors have been designed for the pursuit of extreme sensitivity. A complete redesign of the optics and electronics, as well as removing the effects temperature fluctuation with a new temperature regulated cell body has led to the highest sensitivity with stable detection.

The LC-4000 Series RHPLC system with maximum operating pressure, 70MPa) has been designed to future-proof your HPLC requirements. The system can be used with conventional 3 – 5 μm particle size analytical columns at typical lower pressures around 10 to 20 MPa (1500 to 3000 psi) and can also be used with smaller particles such as shorter length UHPLC columns and superficially porous (SPP) or Coreshell that require slightly higher pressure solvent delivery to provide optimum linear velocity through the column.