The LC-4000 Series RHPLC system with maximum operating pressure, 70MPa) has been designed to future-proof your HPLC requirements. The system can be used with conventional 3 – 5 μm particle size analytical columns at typical lower pressures around 10 to 20 MPa (1500 to 3000 psi) and can also be used with smaller particles such as shorter length UHPLC columns and superficially porous (SPP) or Coreshell that require slightly higher pressure solvent delivery to provide optimum linear velocity through the column.

A simple oil bath that is used for rotary evaporators, etc. 2L specimen flask can be soaked and heated.

Elmasonic Select series equipped with 37 kHz ultrasonic frequency, 5 ultrasonic modes, the possibility to save up to 4 cleaning programmes, a heating and tank volumes from 3 to 90 litres (from Select 60 with drain), Elmasonic Select devices are versatile.

Handheld UV Lamps (6-watts) include shortwave (254 nm), longwave (365 nm) UV or the combination shortwave/ longwave in one lamp.

The MIKRO 185 accommodates 12, 18 or 24 samples and is suitable for a wide range of tasks, thanks to a maximum RCF of 18,845 and a choice of 4 rotors. Spin column kits (minipreps) can also be used thanks to the special design of the 1213-A rotor

This powerful unit is capable of virtually any application you choose. It is able to spin high sample volumes of blood tubes, conical tubes, plates and bottles. Speciality buckets are able to accommodate 450 ml blood bags.

This compact benchtop centrifuge has been developed for large sample volumes. It has a maximum capacity of 4 x 600 ml bottles, 140 blood tubes, 16 microtiter plates or 52 x 15 ml conical tubes, all on a single cost-effective rotor. This unit is available with refrigeration and a temperature range from -20 °C to +40 °C (ROTINA 420 R).

The value of samples makes fundamental the reliability of the storage mode, but also the control of data relating to their preservation. Indication of liquid level, temperature of storage, automatic filling system, alarms, data recording for traceability; ARPEGE guarantees optimum storage conditions.

Each base unit has two expansion bays that allow an isocratic pump to be transformed into a binary or quaternary gradient solvent delivery system with internal degasser, mixer and optional solvent selection for method development.