The UV-4075 (190 – 700 nm) UV-visible HPLC detector uses an advanced Czerny-Turner monochromator with dual wavelength and scanning functions. Baseline change due to refractive index is minimized by the flow cell design, and fluctuation from changes in environmental and lamp temperature are reduced with a regulated lamp housing and temperature controlled cell.

The NRS-4500 Series is a purpose designed Confocal Raman Microscope with a wide functionality to make setup fast and easy. When changing lasers the selection and alignment of the laser, rejection filter and grating are fully automated. The laser spot is observed on all models including 1064nm ensuring that the sample being viewed in actually being measured. Sample identification, imaging analysis and identification can all be done in real time, speeding up the process of preparing the sample to seeing the results.

Integrating spheres measure either the diffuse transmittance or reflectance of a liquid, solid or powder samples. Typically UV-Visible or UV-Visible/NIR spectrophotometers are used to measure the transmittance of a homogeneous, transparent liquid or solid sample. However, when the light is diffusely scattered by samples such as suspended liquid, opaque solid or powders only a small portion of the light reaches the detector. An integrating sphere captures most of the light from the sample offering a more representative measurement of the sample.

The V-730 UV-visible spectrophotometer is designed to be simple to use with precise results, with 1 nm spectral bandwidth for high resolution and a linear dynamic range to over 3 AU across the entire spectrum. The wide wavelength range from 190 to 1100 nm offers versatile measurement for many different applications. Spectra Manager™ CFR (for 21 CFR part 11 compliance) is available as an option.

Possible to shake and stir from low and high temperature. Mixing test tube, microplate, breaker, etc, by only this product !

LABCONCO offers biosafety cabinets appropriate for all biosafety level environments. Type A2, B and C1 Class II biosafety cabinets can accommodate BSL-2, BSL-3 and BSL-4 (with appropriate PPE), and Purifier Class I biosafety enclosures offer BSL-2 protection for applications that do not require product protection.

The Fiske Associate Model 210 Micro-Sample Osmometer determines the osmolality of solutions using freezing point depression (FPD). Ideal for serum, urine or other bodily fluids in clinical applications; and media or formulations in pharmaceutical, biotech or industrial applications.
Automated, single sample, designed to process a 20 mL sample, and 90-second test time. The Model 210 provides the best accuracy and precision in the market today.